FRAME-WORLD can provide machining services such as access holes, taps, cuts and counterbores. We can also provide miter cuts and any special milling, drilling or tapping requirements that you may have.
In addition to the items within this catalog, FRAME-WORLD can also provide panels cut to size and includes any drilling, tapping or machining required for panel mounting.
For all special services and for any parts not shown in this catalog, please contact any of our engineers.
Standard Machining Services
Part No.
Cut to length 5/16″ or 1/4″ slot profiles
- Any profile shape
- Length tolerance = + .015″
- Squareness = .002″ per inch
EM-1
Cut to length EX-45HD
- Length tolerance = +.030″
- Squareness = .005″ per inch
EM-1-EX45
End hole tap
- 5/16″ slot profiles 5/16″-18 x 1.0 deep thread
- .260 dia. extruded hole size
- m8 x 1.25 on request
EM-2
- 1/4″ slot profiles 1/4-20 x .75 deep thread
- .201 dia. extruded hole size
- m6 x 1.0 on request
EM-2
Access Hole Drill
- For 5/16″ wide slot profiles
- the drill dia. = .31″ all the way through
EM-3
- For 1/4″ wide slot profiles
- the drill dia. = .25″ all the way through.
EM-3
Example:
(2) pcs EX-1 x 60.0″ with EM-3’s on A & B at .75 from each end and on B at 30.0″
Total EM-1 cuts =2
Total EM-3 Drills = 10
C’bore or C’sink Hole Drill
Specify type and location for a countersink hole
in a panel or extrusion.
Example:
For a panel: Drill and C’sink for 5/16-18 FHCS per dwg
(must submit sketch of panel)
For an extrusion: Drill and C’bore for 5/16-18 SHCS slot [A] @ 0.75, 2.25 from end.
EM-3C
Anchor Fastener Counter Bores
For 5/16″ slot profiles the counterbore
dia. = .812 x .650 deep location is .875 from the end
Example
(2) EX-2 x 30.0″ with EM-5’s at O & P both ends
Total EM-1 cuts = 2
Total EM-5 counterbores = 8
Total EF-61 anchor fasteners = 8
EM-5
B. For 1/4″ slot profiles the counterbore
dia. = .562 x .445 deep location is .500 from the end
Example
(2) EX-12 x 50.0″ with EM-7’s at N & Q both ends
Total EM-1 cuts = 2
Total EM-7 counterbores = 8
Total 11-242 anchor fasteners = 8
EM-7
C. For 5/16″ slot profiles using double
anchor fasteners EF-63 & EF-64
the counterbore dia. = .812 x .650
location is .875 from the end
Example
(2) EX-12 x 20.0″ with EM-7’s at N & Q both ends
Total EM-1 cuts = 2
Total EM-7 counterbores = 8
Total 11-249 anchor fasteners = 4
EM-7